7 Methods to Lower Your Heating Bill in Austin During the Winter

Your home is usually at the top of the list of your most valued investments. It supports you financially through boosting equity, and it’s a space to watch your family grow and create memorable moments, too. During the winter, you may also be experiencing rising heating expenses.

As a result, finding techniques to lower your heating bill in Austin without compromising comfort can seem harder than it needs to be.

When it comes to energy efficiency, houses are like motor vehicles. Some consume a lot of energy while others use it gradually. Regardless of what sort of residence you have, there are ways to stop the discomfort this winter. The Experts are here with seven tips to help you stay comfortable without breaking the bank.

  1. Change Your Air Filter
  2. It’s the most inexpensive suggestion there is. It’s also the best way to keep your heating system operating optimally throughout the winter.

    The kind of filter and seasonal elements affect how often you should replace it. Soaring allergen counts, pets and home size might also affect its durability. In most cases, fiberglass filters should be replaced monthly. Pleated ones made with higher-quality material could work for three months or longer.

    “It’s really the large thing people overlook,” said Jim Hughes, senior manager of education and training at Service Experts. “The more loaded up the filter is, the less air is able to be filtered through it and actually warm the residence. A clogged filter makes your heating system work harder.”

  3. Schedule Regular HVAC Service
  4. It’s normal to have a technician come to your house in the spring for AC service. That way, your air conditioner is prepared for the warm weather.

    But don’t neglect to schedule an appointment for furnace service before it snows too.

    Among other procedures, an inspection typically includes:

    • Double-checking thermostat settings
    • Cleaning and oiling internal parts
    • Examining system shutdown and startup controls

    Regular service helps lower the likelihood of handling an emergency repair in the middle of a blizzard. Some reports have indicated as many as 75% of “no heat” calls could have been avoided with normal tune-ups.

  5. Inspect Windows and Doors for Leaks
  6. Windows and doors are a central entry point for chilly air. Caulking window and door frames is an inexpensive method to help keep chilly air outside.

    Here’s one assessment that Hughes advises.

    Shut a door. Do you notice any light? If so, it’s not fully sealed. Changes or weather-stripping might be required.

    If your residence has single-pane windows, you should think over a dual-pane upgrade.

    A lot of homeowners insulate single-pane windows with plastic sheeting.

    It’s not a bad move, but dual-pane windows provide enhanced insulation for keeping cold air out.

    When you add double-pane windows, your energy savings could be 25% or better.

  7. Limit Use of Vented Appliances
  8. If you use the exhaust fan while cooking, Hughes suggests against leaving it running for too long.

    The same applies to for the dryer. Don’t allow it to run after your clothes are done.

    Any venting appliance or exhaust fan expels heated air away from your home and increases cold air. Running these appliances longer than needed will make your furnace to use more energy to handle the avoidable coldness.

  9. Look at Your Residence’s Perimeter for Cracks
  10. Inspect your home’s building envelope. This is the barrier that shields your residence from the elements. If there’s a basement, watch for moving cobwebs or cool air flowing in near the edges.

    Polyurethane sealers and other solutions can be bought to fix basement walls allowing air into your residence. Another inexpensive tip is to invest foam seals for fixture bottoms, for example ceiling fans, overhead lights or wall outlets.

    They’re fast to use and are fantastic at stopping cold air in the winter.

  11. Measure Insulation Levels in Your Attic
  12. It’s worth confirming that you have adequate insulation levels in your residence as well. Nine in 10 U.S. residences don’t have enough insulation, according to the North American Insulation Manufacturers Association.

    Hughes suggests visiting the ENERGY STAR® zone map to locate the suitable R-value for your home’s walls and attic space. This value is formulated on the geographic area where your home is.

  13. Consider Our Advantage Program™
  14. Winter could be tough for homeowners with old units.

    If your furnace is not working right or requiring expensive repair, there’s a reasonable chance you’re not set to spend thousands on a new system.

    That’s why we provide our Advantage Program. It helps homeowners like you prevent costly service calls through a small monthly fee.

    We’ll also install a high-efficiency system in your residence. Plus our Expert specialists will fix and maintain it for you without any added out-of-pocket expense

Schedule an Appointment with Us Now

Make your Austin residence more energy efficient with pro assistance from Strand Brothers Service Experts.

For more details about our Advantage Program or to book an appointment for HVAC service, call us at 512-596-1257 or contact us online today.

Contact Us