Your AC equipment uses a chemical refrigerant to transfer humidity within your house outside. This makes your house chilled and comfortable. The model of refrigerant used in your Austin house’s air conditioner has been modified a few times over the years, following innovative breakthroughs and environmental regards.
All modern home AC units in Austin uses R410a, also known as Puron. But this refrigerant will subsequently be phased out. This is a result of a continued focus on restricting chemicals known to negatively impact the environment.
To find out the “why” that drives cooling regulation, it’s useful to put it into perspective. Two-thirds of the 128.5 million residences in the United States have cooling systems, according to the U.S. Department of Energy.
But it’s not really the air conditioning system itself, or even its cooling functions.
The main problem is the refrigerant these units use to make the comfort we enjoy.
Installed after 2010
If your unit was installed after January 1, 2010, it likely uses R410a. And there’s lots of time for you to prepare for the phaseout. So, it’s not a thing you should be bothered about at this time.
Recommendations and dates have been fixed for commercial cooling units. But the starting point of the phaseout for residential air conditioning systems hasn’t yet been set. However, the phaseout could start around 2024 and take 10 years to end.
At that time, you might need to replace your unit anyway, as the regular life expectancy for an air conditioning system is typically 15 years.
Installed Before 2010
This compound isn’t being made right now, but there are still lots of Austin residential cooling systems that use R22. If you have to have service, it could be very expensive as only reacquired and recycled refrigerant is attainable.
Most of the time, we propose buying a new your equipment because of the growing prices of maintaining an air conditioner with R22. In addition, you’ll be getting a better energy-efficient solution.
Give our Experts a call at 512-596-1257 now and we’ll help you start locating a modern model.
How Do I Determine What Type Refrigerant My AC Uses?
If you’re unsure what variety of refrigerant your AC runs on, you can check its nameplate. This piece is usually situated on the exterior condenser. Or you can look in your owner’s manual.
If you’re unable to locate it, Austin residents should reach us at 512-596-1257 and our Experts can provide support.
Why are Refrigerants Damaging to the Environment?
Older kinds of refrigerants can hurt the planet and cause climate change. Here’s a look at the history of residential air conditioner refrigerants:
- Residential air conditioners have used R22, or Freon, for a long time. Researchers determined it was detrimental to the atmosphere and ozone, so manufacturing permanently halted on January 1, 2020.
- R410a is the substitute for R22. It’s what you’ll find in all new cooling units today.
What Should I Do in the Interim?
If your air conditioning is near (or older than) 15 years, now’s a great time to start prepping for replacement.
We get that installing a new system can be a considerable expense. That’s why we offer our exclusive Advantage Program™ as well as financing, With our Advantage Program, you can receive an updated, high-efficiency system for just one low monthly payment. And get maintenance, repairs and parts at no added expense.*
Call us at 512-596-1257 to schedule an appointment now. We’ll review your budget and needs to help you select the ideal comfort equipment for your home.